Mini Carving Bits - SCR MP21-24-SCR
• Mini Carving Bits - Round Type (1/4" or 6mm Shank)
• Smooth & Power Carving with Sharp Cutter 5mm (Replaceable)
• Detail & Sculpting Performance
• Specialized for Textures
Model : MP21-24-SCR
Max. Blade Diameter : 16 mm
Max. Carving Depth : 32 mm
Max. RPM : 25,000 rpm
Power : 90 - 750 Watt
Shank Size : 1/4" or 6mm Shank
Weight : 0.1kg
Overall Length : 55 mm
Blade Type : Round
Blade Width : 5 mm
Number of Teeth : 3 EA
- Please read and follow all safety instructions carefully. Please keep the manual for future reference.
- When operating, always wear safety equipment such as face masks and safety goggles.
- Always secure the workpiece securely when working.
- Make sure that the grinder switch is off before plugging in the power cord.
- Be careful not to touch the cutter blade. Serious injury may result.
- Always operate the tool with both hands firmly gripped, and never leave the tool with rotation.
- When using the tool, always use 220V without speed adjustment so that the speed does not fall below 11000RPM.
- After operation, turn off the switch and set it down when The remaining rotation stops completely.
- Please be sure to use it carefully because it may cause the rotation reaction(kick back) depending on the direction of rotation.
- Please remove the stone, sand and other material beforehand to use. If not, you may get blade damage.
Maintenance and inspection
- Inspect and tighten the bolts of each part before operation.
- After working, please keep clean so that there is no foreign matter such as dust, sawdust and rosin.
- If the cutter blade or belt is worn out, replace it with a new one.
- Manufacturer : MANPA corporation.
- Country of manufacture : Made in the Republic of korea.
- Address : Manpa corporation, 700-20 manseo-ro, Yangseong-myeon, Anseong-si, Gyeonggi-do