Skip to content
********** LOGOSOL SPRING CAMPAIGN NOW ON **********
********** LOGOSOL SPRING CAMPAIGN NOW ON **********

3” Circular Cutter 12mm (MP21-3-12)


• Power Carving Performance with Only 3" Multi Cutter Series
​• Smooth Carving out with Round type 12mm Carbide (Replaceable)
• Multi Function and direction is available
• Detail & Sculpting Performance
• Perfect for Power carving, Texture and Chainsaw carving furs​

Model : 3” Circular Cutter 12mm (MP21-3-12) Max. Blade Diameter : 70 mm Max. Working Depth : 20 mm Max. RPM : 15,000 rpm Disc Bore Size : 16.03 mm Blade Width : 12 mm Number of Teeth : 3 EA


​■ Specifications
Model : MP21-3-12

Max. Blade Diameter : 70 mm

Max. Carving Depth : 20 mm

​Max. RPM : 15,000 rpm @ extension spindle
Power : 630 - 740 watt

Disc Bore Size : 16.03 mm

Weight : 0.1 kg

Overall Length : -
Working Wide : 20 mm

Blade Width : 12 mm

Number of Teeth : 3 EA

Usage and Safety Precautions

 - Please read and follow all safety instructions carefully. Please keep the manual for future reference.  

 -  When operating, always wear safety equipment such as face masks and safety goggles.

 - Always secure the workpiece securely when working.

 - Make sure that the grinder switch is off before plugging in the power cord.

 - Be careful not to touch the cutter blade. Serious injury may result.

 - Always operate the tool with both hands firmly gripped, and never leave the tool with rotation.

 - When using the tool, always use 220V without speed adjustment so that the speed does not fall below 11000RPM.

 - After operation, turn off the switch and set it down when The remaining rotation stops completely.

 - Please be sure to use it carefully because it may cause the rotation reaction(kick back) depending on the direction of rotation.

 - Please remove the stone, sand and other material beforehand to use. If not, you may get blade damage.

Maintenance and inspection

​- Inspect and tighten the bolts of each part before operation.
- After working, please keep clean so that there is no foreign matter such as dust, sawdust and rosin.
​- If the cutter blade or belt is worn out, replace it with a new one.

Quality display

- Manufacturer : MANPA corporation.

- Country of manufacture : Made in the Republic of korea.

- Address : Manpa corporation, 700-20 manseo-ro, Yangseong-myeon, Anseong-si, Gyeonggi-do