Skip to content
********** LOGOSOL GEAR UP CAMPAIGN NOW ON **********
********** LOGOSOL GEAR UP CAMPAIGN NOW ON **********

2” Holes Cutter (MP21-8-2) 2” Holes Cutter • Round Shape Carbide 8mm

€120.00

Usage
• 45mm Blades diameter
• Smooth grooving with Sharp Carbide
• Power Gouge & Drilling for Beehive and wooden pockets
• Extension Performance (with sanding Tool)
• More safety & Tough work (with Grinder holder)

Angle grinder is not included
Please check your "Spindle size" of angle grinder.

Model : 2” Holes Cutter (MP21-8-2) Max. Blade Diameter : 45 mm Max. Gouge Depth : 110 mm Max. RPM : 15,000 rpm Disc Bore Size : M10, M14, 5/8”-11(option) Blade Width : 8 mm Number of Teeth : 3 EA

 

Usage and Safety Precautions

 - Please read and follow all safety instructions carefully. Please keep the manual for future reference.  

 -  When operation, always wear safety equipment such as face masks and safety goggle.

 - Always secure the workpiece securely when working. 

 - Make sure that the grinder switch is off before plugging in the power cord.

 - Be careful not to touch the cutter blade. Serious injury may result.

 - Always operate the tool with both hands firmly gripped, and never leave the tool with rotation.

 - When using the tool, always use 220V without speed adjustment so that the speed does not fall below 11000RPM.

 - After operation, turn off the switch and set it down when The remaining rotation stop completely.

 - Please be sure to use it carefully because it may cause the rotation reaction(kick back) depending on the direction of rotation.

 - Please remove the stone, sand and other material beforehand to use. If not, you may get blades damage.

Maintenance and inspection

- Inspect and tighten the bolts of each part before operation.
 
- After working, please keep clean so that there is no foreign matter such as dust, sawdust and rosin.

 
​- If the cutter blade or belt is worn out, replace it with a new one.