Skip to content
********** LOGOSOL GEAR UP CAMPAIGN NOW ON **********
********** LOGOSOL GEAR UP CAMPAIGN NOW ON **********

2" Belt Cutter Housing (MP21-2-H)

€145.00

Recommended for 3" Multi cutter Users
(Head change performance)
*Only 2" Blades can be used.

Includes :
• One - 2" Circular Cutter 6mm
• Belt Cutter Head

​​Features :
• Smooth Carving with Sharp Carbide
• Detail & Sculpting Performance
• Vibration Reduction

*Angle grinder is not included
Please check your "Spindle size" and "angle grinder".

TECHNICAL SPECIFICATIONS

​• Model :   MP21-2-H
​• ​Max. Blade Diameter :   45 mm​
​• Max. Carving Depth :   10 mm @ 2” Blades
​• Max. RPM :   16,500 rpm @ extension spindle
​• Power :   630 ~750 Watt

​• Disc Bore Size:   9.5 mm
​• Weight :   -
​• Overall Length :   -
​• Working Width :   10 mm @ 2” Blades
​• Blade Width :   6, 8 mm (option)
​• Number Of Teeth :   3 EA @ 2” Blades






Angle Grinder : Spindle Size &  Model

Angle grinder is not included.
Please check your "Spindle size" and "angle grinder".

M10 : Fit to Bosch, Makita

M14 : Fit to Bosch : 1375A, GWS8-45, GWS9-45, GWS18V-45
                     Makita : GA4030K, GA4030, GA4530K, GA4530, GA4534, GA4530X, 9557NB, 9556NB, 9558PB, 9557PB, 9565PCV, GA4542C 
                                    XAG042Z, XAG09Z, XAG11Z, XAG16Z, XAG20Z, XAG17ZU, XAG21ZU.
                     Dewalt : DCG405B, DWE4011, DWE4012, DWE4120, DWE4120N
                     Milwaukee : 2783-20(22,22HD), 2781-20(21,22,22HD), 2980-20(21-22), 2981-20(21,22)

5/8"-11 : Fit to Bosch : 1375A, GWS8-45, GWS9-45, GWS18V-45
                     Makita : GA4030K, GA4030, GA4530K, GA4530, GA4534, GA4530X, 9557NB, 9556NB, 9558PB, 9557PB, 9565PCV, GA4542C 
                                    XAG042Z, XAG09Z, XAG11Z, XAG16Z, XAG20Z, XAG17ZU, XAG21ZU.
                     Dewalt : DCG405B, DWE4011, DWE4012, DWE4120, DWE4120N
                     Milwaukee : 2783-20(22,22HD), 2781-20(21,22,22HD), 2980-20(21-22), 2981-20(21,22)

Usage and Safety Precautions

 - Please read and follow all safety instructions carefully. Please keep the manual for future reference.  

 -  When operating, always wear safety equipment such as face masks and safety goggles.

 - Always secure the workpiece securely when working.

 - Make sure that the grinder switch is off before plugging in the power cord.

 - Be careful not to touch the cutter blade. Serious injury may result.

 - Always operate the tool with both hands firmly gripped, and never leave the tool with rotation.

 - When using the tool, always use 220V without speed adjustment so that the speed does not fall below 11000RPM.

 - After operation, turn off the switch and set it down when The remaining rotation stops completely.

 - Please be sure to use it carefully because it may cause the rotation reaction(kick back) depending on the direction of rotation.

 - Please remove the stone, sand and other material beforehand to use. If not, you may get blade damage.

Maintenance and inspection

​- Inspect and tighten the bolts of each part before operation.
 
- After working, please keep clean so that there is no foreign matter such as dust, sawdust and rosin.
 
​- If the cutter blade or belt is worn out, replace it with a new one.

Quality display

- Manufacturer : MANPA corporation.

- Country of manufacture : Made in the Republic of korea.

- Address : Manpa corporation, 700-20 manseo-ro, Yangseong-myeon, Anseong-si, Gyeonggi-do