Logosol Stack Cutter PK1500

Cut board stacks cost-effectively - with impressive precision.

The stack cutter cross-cuts board stacks with great accuracy. The 150 cm, 135 cm or 120 cm (59", 53" or 47") long guide bar is steered by the bar nose holder. The chain is a standard 3/8” cross-cut chain driven by our powerful 5 kW (7 hp), 3-phase electric motor E5000. In line with Logosol’s philosophy, we have examined a function that earlier cost a fortune to accomplish, and produced a smaller and lighter solution. In this case a stack cutter that takes the cut linearly vertically, a feature that normally only is found in larger industrial machines. The advantages of cutting linearly is that the capacity significantly increases both as regards sawing speed and the size of the board stack. Logosol’s stack cutter has a relatively low weight since it is mainly made of aluminium. Three large wheels make it easy to move the machine by hand. One of the wheels is adjustable in height, and with the help of fixed sigths the cut can be aligned. With the stack cutter comes a 2 m (6 ft 7") long measuring rod, which is a good means of measuring the length of the stack.

Cut time

Why spending time cutting the boards one by one? With Logosol’s stack cutter you cut the entire board stack at once. Just adjust it to the desired length and then let the stack cutter do the job, quickly and efficiently. What used to take a whole day can now be done in half an hour; what used to take an entire week you can accomplish in half a day. It is easy, it is fun and you can spare time for doing other things.

Cut costs

If you regularly cut large amounts of lumber into length, the easiest way is to do it with a stack cutter. It saves time. You are also spared from monotonous tasks that strain your body. Logosol’s mobile stack cutter does not take up a great deal of room, and by quickly cutting the stacks so that they are more easy to handle, you will save even more space. As Logosol’s stack cutter is such a small investment, it will be profitable already when cutting small volumes 

Cut accurately

With Logosol’s stack cutter you can cut your board stacks with an accuracy down to +/- 2 mm (1/16"). This is due to our portal technique, where the guide bar is fitted at both ends. The accuracy is significantly better than comparable stack cutters that have turnable guide bars, i.e. radial cutting. 

Simple installation

There is no need for a special installation. The stack cutter is ready for use on delivery. Thanks to the low weight, it is easy to roll in place over the stack to be cut. The stack does not have to lie completely level as the stack cutter can be adjusted to the correct angle. Line up the cut, set the stack cutter, push the start button and let the guide bar sink down through the boards.